"BEAUTY CARE"Updated a year ago

Even for storage or transport please always make sure to close the length adjustment lock system. In the open position the snap part is fully stretched out and therefore might loose a bit of its snapping function after a while.
 

Over time even stainless steel and aluminium parts get affected by salt water.
Therefore after holidays in salt water please remove the tail-end and rinse it as well as the inside of the boom body with fresh water.
For winter storage make sure to remove the tail-end from the body.
 

Please make sure to regularly check the condition of the ropes (front- and tail-end). Over time the rope surface might get damaged through the clamping in the metal cleat. When you start seeing the white core it's time to replace the rope.
 

The EVA grip is very cozy on your hands but it doesn't like sharp objects. Therefore don't rig up on concrete but try to rig on a soft ground (e.g. sand or gras).
Little cuts in the EVA you need to "ignore".
Little parts peeling off can easily be repaired using super glue.
In case the grip needs to be replaced (cause it's halfway gone or cause you cannot stand it destroying the beauty of your boom:-) do not try to do this on your own. It's a very delicate and time-consuming procedure which you should leave to professionals.
 

Need any spare parts? Here you go